Orillia Home Inspector Tips

Providing Valuable Home Owner Resources for Maintenance

Category: WETT Inspection

Barrie WETT Inspections

Barrie WETT Inspections – Report issued at time of inspection

Roger Frost has been WETT Certified for over 15 years.

Same day WETT Inspections in Barrie area –  48 hrs for other areas.

If your WETT inspection is performed as part of Home Inspection package you will only have to pay $50.00,  also we do not charge a re-inspection fee for most inspection failures.

Wood Energy Technology Transfer Inc. (WETT) is a non-profit training and education association that promotes the safe and effective use of wood burning systems in Canada.  Most insurance companies now require home owners to have a WETT Certified Inspector provide a report on the condition of their wood burning appliance prior to issuing a Home Owners Insurance Policy.

 

Ensure your wood burning system is installed correctly and operating as it should by scheduling a certified WETT inspection through Barrie WETT Inspections. We will ensure that it poses no threat to the safety of your home and family and we can also offer advice on how your system should be properly maintained for safety and efficiency.

Your Barrie WETT Inspection includes checking the following items:

  • Chimney & Cap
  • Chimney Liner or Flue Tiles
  • Smoke  Chamber
  • Wood Stove or Fireplace Damper
  • Firebox & Firebricks/Linings
  • Hearth & Floor Protection
  • Mantle & Clearances to Combustible Walls & Ceilings
  • Heat Shield Construction for Reduced Clearances
  • Proper Flue Pipe Installation & Venting
  • Clearance to Combustible Exterior Items
  • Chimney Foundations & Masonry
  • Overall Condition of the Woodstove, Fireplace and its Chimney

Although your installation might not have one or more of these items,  we are fully trained to inspect any of the above components that pertain to your wood burning appliance.

WETT inspections are now required by most insurance companies. In fact,  homeowners are often asked by their insurance companies to provide them with a WETT Certified Inspection report as part of the condition of insuring their home. Every insurance company has different requirements,  call your insurance company prior to purchasing home to find out exactly what they expect and require from you.  Many homeowners are “blind sided” by the expectations of their insurance company.  We recently had a situation where the wood stove met all the requirements of a WETT Certified Inspection but the Insurance Company had their own policy that they would not insure an Uncertified Wood Stove.

 

WETT inspections offer you more than peace of mind, if wood-burning appliances is part of your home’s features, it is important that these appliances are both installed correctly and inspected by a qualified person.

If you have any questions regarding WETT inspections or installation procedures please call Roger at 705-795-8255

 

For information of reducing clearances to combustibles

Do I Need a WETT Certified Inspection?

WETT Inspection Regulations

 

 

 

 

Wood Energy Technology Transfer – WETT

Wood Energy Technology Transfer – WETT

(WETT Inc.) is a non-profit training and educational association (www.wettinc.ca).

WETT Certified Technician

Over 15 years experience

Through its administrative designate, WETT Inc. functions as the national registrar of the WETT program. In carrying out its mandate to promote increased safety and effectiveness, WETT Inc. maintains the Wood Energy Technical Training program (WETT).
Until recently, the scope of work performed in the inspection or evaluation of a fireplace, stove or other venting system was generally up to the discretion of the chimney service technician. Professional service technicians now have an industry standard that removes much of that “discretion.” The National Fire Protection Association (NFPA) has addressed the minimum chimney inspection standards in its latest publication (NFPA 211) concerning home heating appliances.

Inspections are now classified as Level 1 , Level 2 or Level 3 . Each level of inspection covers specific items depending on the individual appliance and venting system. Below is an explanation of the three levels of inspections and what services your chimney service technician should provide for each level.

Level 1 Inspections

If your appliance or your venting system has not changed and you plan to use your

Level 1 WETT Inspection for Insurance

Level 1 WETT Certified

system as you have in the past, then a Level 1 inspection is a minimum requirement. A Level 1 inspection is recommended for a chimney under continued service, under the same conditions, and with the continued use of the same appliance. In a Level 1 inspection, your chimney service technician should examine the readily accessible** portions of the chimney exterior, interior and accessible* portions of the appliance and the chimney connection. Your technician will be looking for the basic soundness of the chimney structure and flue as well as the basic appliance installation and connections. The technician will also verify the chimney is free of obstruction and combustible deposits.

Level 2 Inspections

A Level 2 inspection is required when any changes are made to the system. Changes can include a change in the fuel type, changes to the shape of, or material in, the flue (i.e. relining), or the replacement or addition of an appliance of a dissimilar type, input rating or efficiency. Additionally, a Level 2 inspection is required upon the sale or transfer of a property or after an operation malfunction or external event that is likely to have caused damage to the chimney. Building fires, chimney fires, seismic events as well as weather events are all indicators that this level of inspection is warranted. A Level 2 inspection is a more in-depth inspection than a Level 1 inspection.– When a Level 1 or Level 2 inspection suggests a hidden hazard and the evaluation cannot be performed without special tools to access concealed areas of the chimney or flue, a Level 3 inspection is recommended.

A Level 3 inspection addresses the proper construction and the condition of concealed portions of the chimney structure and the flue. Removal or destruction, as necessary, of permanently attached portions of the chimney or building structure will be required for the completion of a Level 3 inspection.

A Level 2 inspection includes everything in a Level 1 inspection, plus the accessible portions of the chimney exterior and interior including attics, crawl spaces and basements. It will address proper clearances from combustibles in accessible locations.

There are no specialty tools (i.e. demolition equipment) required to open doors, panels or coverings in performing a Level 2 inspection. A Level 2 inspection shall also include a visual inspection by video scanning or other means in order to examine the internal surfaces and joints of all flue liners incorporated within the chimney. No removal or destruction of permanently attached portions of the chimney or building structure or finish shall be required by a Level 2 inspection.

Level 3 Inspections

A Level 3 inspection includes all the areas and items checked in a Level 1 and a Level 2 inspection, as well as the removal of certain components of the building or chimney where necessary. Removal of components (i.e., chimney crown, interior chimney wall) shall be required only when necessary to gain access to areas that are the subject of the inspection. When serious hazards are suspected, a Level 3 inspection may well be required to determine the condition of the chimney system.

 

The type of inspection most insurance companies are looking for is a visual inspection that must be conducted by a WETT Certified professional to determine if there is evidence of any potential problems with the installation of the wood-burning appliance or with the installation of the chimney. Of course, the assumption is the wood-burning appliance has been safety certified and therefore, the installation is compliant with the manufacturer’s installation instructions.

Your WETT inspection is conducted according to the protocols established by WETT and includes:

  • Assessing the condition of the appliance, chimney, and flue pipe;
  • Checking for proper appliance and chimney installation and venting;
  • Verifying clearances around the appliance, flue pipe and visible chimney components; and,
  • Assessing hearth and floor protection.

Results will be discussed upon completion of the inspection and a WETT inspection report will be provided.

With over 15 years experience as a WETT Certified Technician we provide services to WETT Certified InspectionsAlliston, Angus, Barrie, Bradford, Cookstown, Creemore, Everett, Innisfil, Midland, Orillia, Penetang, Ramara, Stayer and all of Simcoe County.

Call Roger at 705-795-8255 or

Email Roger

Orillia Home Inspector Tips © 2014 Frontier Theme